9.5. Weighing Units Availability
You can declare which units are to be accessible upon pressing button. Units with
parameter value set to <Yes > option are available for selection in particular working
modes, i.e. modes facilitating units change.
Units with parameter value set to <No
> option will not be accessible in the
course of the weighing instrument
operation.
9.6. Start Unit Selection
Upon setting start unit, the moisture analyzer activates with the set start unit for these
modes where change of the unit is possible.
Accessibility of particular units is conditioned by the weighing instrument status; i.e. it
depends on the fact whether the given weighing instrument is verified or not.
To Next Page
Loading...
