9. WEIGHING
Load the weighing pan. Upon displaying marker on the left, you can read weighing
result.
Record/printout of the measurement result is available on pressing <PRINT> key:
• for verified weighing instruments – only stable weighing result is recorded or printed
(stability marker displayed),
• for non-verified weighing instruments – stable or unstable weighing result is
recorded or printed (stability marker not displayed); Unstable weighing result is
marked with <?> on the printout, the question mark is printed next to the weight
value.
9.1. Good Weighing Practice
To assure long-term operation and correct mass measurements, follow the rules
presented below:
Start the moisture analyzer with no load on the weighing pan (permissible
value of load on the weighing pan at start is ±10% of the maximum capacity).
Load the weighing pan steadily avoiding shocks:
Place weighed loads centrally on the weighing pan:
Avoid side loading, in particular side shocks:
9.2. Log In Operation
In order to access operator-related parameters and in order to edit databases, you need to
log in as an operator with <Administrator> permissions levels.
First log in operation:
• Go to home screen, press button, wait for the operators database to open.
• Select <Admin> operator, wait for the on-screen keyboard with a password box to
open.
• Enter „1111” password and press button to confirm.
• The home screen is displayed.
To Next Page
Loading...
Need help?
General
