14.2. Products
Product database stores names of all products that can be weighed, counted, controlled.
List of parameters defined for a product:
1. Name
2. Code [product code]
3. EAN [Product EAN code]
4. Mass [Nominal sample mass]
5. Tare [Product tare value, set automatically
when the product is selected out of the database]
6. Min [Low limit for product weighing in CHECKWEIGHING mode]
7. Max [High limit for product weighing in CHECKWEIGHING mode]
8. Tolerance [% value calculated in relation to mass, the parameter determines
measuring area for which the measurement is recognized as
correct for DOSING mode.]
14.3. Operators
Operators database features list of users permissioned to operate the weighing device.
Parameters defined for an operator:
Name
Code
Password
Permissions
Language
14.4. Packaging
<Packaging> database contains list of packages for which a name, code and mass value are
specified. When carrying out weighing process, upon selection of particular packaging, a
respective tare value is triggered automatically. The tare value is displayed with minus sign.
Parameters defined for packaging:
1. Name
2. Code [internal packaging code]
3. Tare [packaging weight]
14.5. Customers
Customers database stores list of customers for whom the measurements are carried out.
List of parameters defined for a customer:
1. Name
2. Code [internal customer code]
3. TIN
4. Street
5. Postal code
6. City
To Next Page
Loading...
Need help?
General
