Since use of the moisture analyzer conversely to safety precautions and service manual
guidelines may be hazardous to operator’s health and life, it is obligatory to read them
carefully:
• Use the moisture analyzer to determine humidity content in samples and to
determine mass of a tested sample; any other use of the moisture analyzer may be
dangerous both to the device and the operator,
• Before commissioning the moisture analyzer, make sure that the nominal power of
the device specified on its data plate is compatible with the supply in the mains to
which the moisture analyzer is to be plugged in,
• Halogen lamp and IR emitter can only be changed by an authorized service
employee,
• Protect moisture analyzer against contacts with liquids, it might lead to electrocution,
fire, emission of substances containing toxic or caustic vapour, emission of explosive
substances.
2.6. Warranty
The warranty does not cover:
• defects being an effect of not respecting service manual guidelines,
• using the moisture analyzer conversely to its intended use,
• any modifications of a moisture analyzer or cases when its housing has been
opened (damaged protective stickers),
• mechanical defects or defects caused by liquids, water and natural wear,
• defects caused by inappropriate setting or by electrical wiring failures,
• overloading of the measuring mechanism.
2.7. Supervision over Metrological Parameters
Metrological parameters need to be checked in determined time intervals. Inspection
frequency is conditioned by ambient conditions in which the moisture analyzer is used,
kind of carried out processes and adopted quality management system.
2.8. Service Manual Significance
It is very important to read the service manual carefully before switching on and starting
up moisture analyzer operation, even if you are experienced and have worked with this
type of instrument before.
2.9. Staff Competence
The moisture analyzer should be utilized and supervised only by users who are trained
and experienced in such type of instruments.
In order to use the moisture analyzer, first read the service manual. Keep these
instructions for the future reference.
Do not make any design modifications. Additional equipment compatible with the
moisture analyzer and spare parts should be supplied by RADWAG or an authorized
distributor.
To Next Page
Loading...
