the code page, code of the UK signs chart: 1B5203. In such case the <CONTROL
CODES> parameter setting has to be as follows:
prefix – 1B74121B5203
Control codes for exemplary code pages:
22.3. Record of Measurement Data Onto a USB Flash Drive
The moisture analyzer software enables record of measurement data onto an external flash
drive.
Procedure:
• Plug a USB flash drive into USB 1 port, type A.
• Enter <PERIPHERALS/PRINTER/PORT> submenu and set <PENDRIVE> value.
• Set file format: *txt or *.csv
• Return to weighing.
• key, when pressed, provides record of measurement data (specified for GLP
PRINTOUT), wherein the data is saved in a form of a text file, created automatically
by moisture analyzer software; The file name is: printout.txt.
• Remove the USB flash drive from a moisture analyzer's USB port after about 10s
counting from the last measurement record, only after this time the data is saved.
Next plug the USB flash drive to a computer and read the saved text file using
Notepad or Excel.
The data can be printed using any computer-connected printer. It is possible to overwrite
the file with new data therefore you can continue recording measurement data using the file
once created.
To Next Page
Loading...
Need help?
General
