• When logged, add operators and set permissions (for detailed procedures read the
user manual).
While logging in again, select an operator from the list and enter the password; the
program initiates operation with permissions set for the selected operator.
Log Out operation:
• Go to home screen, press button, wait for the operators database to open.
• Select <Log out> option (1st position on the operators list).
• The home screen is displayed.
Permissions
There are 3 permissions types: administrator, advanced operator, operator.
Access to operator-related parameters, databases and program functions is
conditioned by permissions:
Available parameters and functions
Operator can edit the following submenus: parameters of
<Readout/Filter> submenu, set parameters of <Misc.> submenu
(except for <Date and time>, <Permissions>, <Software update>
parameters). Operator can run and carry out all weighing
operations. Operator can preview <Databases> data, and define
Operator can edit the following submenus: <Readout>;
<
W
orking
modes>;
<Commu
nication>
; <Per
ipherals
>; <Mi
sc.>
(operatio
n of <
Date an
d time>
, <Permis
sions
> and
<Databases> edition excluded). Operator can run and carry out
Operator can edit all operator-related parameters and all
databases, and use all functions.
9.3. Units
UNITS parameter group enables you to specify which mass units are to be available in the
course of operation, and to define two custom units. These two options improve both
comfort and speed of work. It is possible to change unit to other than unit [g] in
WEIGHING mode exclusively.
9.4. Weighing Unit Selection
In order to change the weighing unit either press the weighing unit pictogram displayed
next to the weighing result value or press button (if provided in the information box).
Pressing the unit triggers its change, the clicked unit gets replaced with the unit that is
next on the list of available units. Another method for unit change is selecting a particular
unit out of the units list, to view the list press button (if provided in the information
box).
To Next Page
Loading...
Need help?
General
