o Select the mode that is to be operated.
13.3. Working Mode Parameters
Each working mode has programmable parameters determining its functioning. For
overview of WEIGHING mode parameters, read section 9 of this user manual. Settings
related to DRYING mode are to be found in respective sections describing particular
working modes.
14. DATABASES
Weighing device software comprises the following databases < >:
• Products (5 000 records)
• Operators (100 records)
• Packaging (100 records)
• Customers (1 000 records)
• Drying programs (200 records)
• Drying process reports (5000 records)
• Ambient conditions (10 000 records)
• Weighings (50 000 records)
Caution:
It is not possible to edit some of the databases for a moisture analyzer integrated with E2R
software. Use PC software to introduce modifications.
14.1. Database Connected Operations
The program enables the following operations to be carried out: adding new record,
exporting data from databases, importing data to databases, deleting one record from the
database, deleting all records from database, printing record data.
Access to the above operations is conditioned by permissions levels.
Adding a New Record
Procedure:
• Enter database, press pictogram located in the top bar.
• Define fields for the new record (data type is conditioned by a database).
• Database window is displayed, it features newly added record.
Export
Procedure:
• Connect the USB flash drive.
• Enter the database that is to be exported.
• Press button located on the top.
• The program automatically saves exported data to a USB flash drive file, respective
messages are displayed for confirmation of successfully completed operation.
• The file name is correlated with the name of exported database.
To Next Page
Loading...
Need help?
General
