Import
Procedure:
• Save the file with database that is to be imported to a USB flash drive. Only files
exported from other moisture analyzer that have proper names and extensions can
be imported – see the above table.
• Connect the USB flash drive.
• Enter the database that is to be imported.
• Press button located on the top.
• The program automatically reads the file and the data is imported to the moisture
analyzer. Respective prompts are displayed for confirmation of successfully
completed operation.
Delete a Record
To delete a record:
• Press and hold operator name.
• Message <Delete?> is displayed.
• Press < > button.
• The record gets deleted from the list.
Delete a Database
Procedure:
• Enter the database and press button (Delete all).
• Message <Delete all records?> is displayed.
• Press < > button.
• Database content gets deleted.
DRYING PROCESS REPORTS and WEIGHINGS databases cannot be imported. DRYING
PROCESS REPORTS database cannot be deleted. The database records can only be
exported and saved to a USB flash drive. Names of files with exported data feature serial
number and respective extension (see below table).
Files can be read using ALIBI Reader, PC software designed by RADWAG. You can
download the software from RADWAG website: www.radwag.pl.
AMBIENT CONDITIONS database serves informative purposes only. Using records preview
option you can check ambient conditions and observe how they changed over time. The data
saved to records can be printed by pressing pictogram located in the top bar. Records
names contain date and time of saving the record’s data to moisture analyzer memory.
To Next Page
Loading...
