14.6. Drying Programs
Drying programs database provides any data regarding the drying process.
List of parameters defined for drying programs:
1. Name
2. Code
3. Drying profile
4. Finish mode
5. Printouts
6. Sample mass control
14.7. Drying Process Reports
Drying process reports provide information about carried out drying processes. Each report
can be previewed and printed.
Procedure:
• Enter < Database> submenu and press <Drying process reports> entry.
• Select report, if not visible, scroll the list using navigation buttons.
• Report is named by date and time; e.g. 2016.07.12 15:12:15.
List of formulations reports data:
1. Operator
2. Drying program
3. Start date
4. End date
5. Drying time
6. Status
7. End mass
8. Drying process status
9. Result
14.8. Ambient Conditions
Ambient conditions database contains parameters related to ambient conditions. Depending
on the moisture analyzer type the ambient conditions report can show values of temperature,
humidity, atmospheric pressure. If the given moisture analyzer is connected to a THB
module then its indications are recorded to the database too.
Procedure:
• Enter < Databases> submenu and press <Ambient conditions> entry.
• Select the respective record, if not visible scroll the records list down.
• Record name includes data and time.
To Next Page
Loading...
Need help?
General
