Project name matching particular weighing type (31 characters
maximum).
Performed adjustment type.
Project name printout (see: Project parameter).
Adjustment performance date.
Adjustment performance time.
Difference between mass of adjustment weight that was measured
during last adjustment and mass of currently measured adjustment
weight.
Line separating data and signature fields on a printout.
An area for the signature of an operator carrying out the adjustment.
• The way of inserting project name.
For the parameters described above, one of these values
must be selected:
NO - do not print.
YES - print.
12.2. Drying Process Report Printout
Group of parameters allowing you to declare variables that are to be printed on a drying
report printout. The Drying Process Report is divided into three individually customized
sections: header, measurement and footer.
The settings are valid for Drying Process mode exclusively.
To Next Page
Loading...
Need help?
General
