Upon drying process completion, summary of the test
is displayed, final moisture content result is held,
drying chamber's lid gets opened automatically.
Upon process stop, printout footer is sent to a
selected interface (accordingly to set printout options
– parameter group DRYING PROCESS
REPORT/FOOTER).
Drying process can be aborted at any time. Press button to abort the drying process and
press button to confirm.
Manual auto switch-off mode is an exception to the rule – for moisture analyzer working in
this mode, the drying process ends upon pressing button. There is no need to confirm by
pressing button.
Drying report is printed again by pressing button.
The report is automatically saved to reports database.
Press button to return to home screen. Moisture analyzer returns to its initial state,
completed process summary is blanked. The moisture analyzer is ready to perform another
test.
To Next Page
Loading...
