Press to enter tare manually.
Procedure:
• Press quick access button - . The key is available regardless of the working mode
you operate.
• An on-screen numeric keyboard is displayed.
• Enter tare value and press button.
• Moisture analyzer returns to weighing mode. Tare value with „–" sign is displayed.
Deleting Tare
The tare value indicated on the display can be deleted by pressing key on the
operation panel, or by using programmable <Deactivate tare> function button.
Procedure 1 - upon taking the tared load off the weighing pan:
• Press key,
• The <Net> marker gets deleted, new zero point is determined.
Procedure 2 - with tared load on the weighing pan:
• Press key,
• The <Net> marker gets deleted, new zero point is determined.
• When the zeroed value is above 2% of the maximum capacity, then the software
displays a respective error message.
Selecting tare value out of PACKAGING DATABASE
Procedure:
• Press key located on the operation panel.
• Wait for a respective window to open, next press button (PACKAGING).
• Window with a list of tare values recorded into packaging database opens.
• Select the packaging that is to be used.
• Moisture analyzer returns to weighing mode. Tare value with „–" sign is displayed.
OR
• Press button (if provided on the display).
• Window with a list of tare values recorded into packaging database opens.
• Select the packaging that is to be used.
• Moisture analyzer returns to weighing mode. Tare value with „–" sign is displayed.
Autotare
Autotare function provides automatic taring of the packaging during the weighing process
when packaging mass for each of the product is different. For detailed description of
Autotare function operation, read later section of this user manual.
Deleting Tare
The entered tare value can be deleted by pressing key, located on the operation
panel, or by entering value of 0.000g (read the above description).
To Next Page
Loading...
Need help?
General
