Proximity Sensors Sensitivity
The parameter is adjustable between 0 – 100, and it determines the distance from which the
IR proximity sensors react. The distance can be adjusted within 0% - 100% range, for lower
values the proximity sensors operate at a shorter distance.
Setting:
Date
Enter this parameter to set current date.
Setting:
Time
Enter this parameter to set current time. Time and date parameters modification proceeds
likewise.
Date Format
Enter this parameter to set date format [YYYY.MM.DD / YYYY.DD.MM / DD.MM.YYYY /
MM.DD.YYYY]; where: YYYY – year; MM – month; DD – day.
Time Format
Enter this parameter to set time format [12h/24h].
When you set [12h] value for TIME parameter, <A> or <P> letter is displayed next to the
time. A stands for hours before the noon, P stands for hours after the noon. Time printout
features either letters AM or PM.
Backlight Standby Time
Parameter allowing you to set time interval, in [min], after which the screen goes black when
no weighings are being carried out. The screen will go black if the weighing result is stable.
NONE - backlight standby time inactive, 0.5; 1; 2; 3; 5 - time given in minutes.
If the indication is stable during the declared time interval, the backlight gets deactivated
automatically. Backlight activates upon indication change (stability marker not displayed) or
upon pressing operation panel key. Backlight deactivation works also when the weighing
instrument's menu is entered.
To Next Page
Loading...
Need help?
General
