RADWAG PUE HX7

79
Buttons that are assigned to operation panel keys:
Local parameters (button inactive during the ongoing process).
Product selection.
Process start.
Process stop.
Breakdown stop.
Bar graph functioning, 1-stage automatic dosing:
• Visualisation of mass value lower than the value of [DT2] threshold:
• Visualisation of mass value higher than the value of [DT2] threshold:
Bar graph functioning, 2-stage automatic dosing:
• Visualisation of mass value lower than the value of [DT1] threshold:
• Visualisation of mass value higher than the value of [DT1] threshold and
lower than the value of [DT2] threshold:
• Visualisation of mass value higher than the value of [DT2] threshold:
• Upon exceeding the value of fast dosing threshold, fast dosing outputs are
activated.
DT1=0g
DT2=1800g
DT1=0g
DT2=1800g
DT1=1600g
DT2=1800g
DT1=1600g
DT2=1800g
DT1=1600 g
DT2=1800 g