To Next Page

To Previous Page

Function Reference

R&S

FPC

394User Manual 1178.4130.02 ─ 07

Remote command:

Attenuation: INPut:ATTenuation on page 255

Automatic attenuation: INPut:ATTenuation:AUTO on page 255

Attenuation mode: INPut:ATTenuation:MODE on page 256

20.7.4 Sweep Menu

Access: [Sweep]

Continuous Measurement...........................................................................................394

Single Measurement................................................................................................... 394

Trigger.........................................................................................................................394

Continuous Measurement

See "Selecting the measurement mode" on page 156.

Remote command:

Measurement mode: INITiate:CONTinuous on page 262

Start measurement: INITiate[:IMMediate] on page 263

Single Measurement

See "Selecting the measurement mode" on page 156.

Remote command:

Sweep measurement: INITiate:CONTinuous on page 262

Start measurement: INITiate[:IMMediate] on page 263

Trigger

See "Selecting the trigger source" on page 112, "Defining a trigger delay" on page 113

and "Using the I/Q power trigger" on page 169.

Remote command:

Trigger source: TRIGger[:SEQuence]:SOURce on page 322

I/Q power: TRIGger[:SEQuence]:LEVel:IQPower on page 322

Trigger slope (external): TRIGger[:SEQuence]:SLOPe on page 264

Delay (external): TRIGger[:SEQuence]:HOLDoff[:TIME] on page 264

20.7.5 Trace Menu

Access: [Trace]

Memory....................................................................................................................... 394

Trace ▶ Memory......................................................................................................... 395

Memory

See "Working with memory traces" on page 117.

(Only one trace available in digital demodulation.)

Remote command:

CALCulate<n>:MATH<t>:COPY:MEMory on page 266

Function Reference: Digital Demodulation

R&S FPC Series User Manual

Questions and Answers: