R&S FPC Series - Page 269

Remote Control
R&S
®
FPC
266User Manual 1178.4130.02 ─ 07
CALCulate<n>:MATH<t>:COPY:MEMory [<MemorySlot>]
This command copies a trace into the memory of the R&S FPC.
Prerequisites for this command
●
Turn on a trace with a trace mode other than "Blank" (DISPlay<n>[:WINDow]:
TRACe<t>:MODE).
Suffix:
<n>
.
irrelevant
<t> Trace
Setting parameters:
[<MemorySlot>] not supported
Example: //Copy the trace into the memory
DISP:TRAC2 ON
DISP:TRAC2:MODE AVER
CALC:MATH2:COPY:MEM
Usage: Setting only
Manual operation: See "Memory Traces" on page 373
See "Memory" on page 383
See "Memory" on page 394
See "Memory" on page 401
CALCulate<n>:MATH<t>[:EXPRession][:DEFine] <Expression>
This command defines the mathematical operation for the trace mathematics.
Prerequisites for this command
●
Save a trace to the memory (CALCulate<n>:MATH<t>:COPY:MEMory).
●
Turn on trace mathematics (CALCulate<n>:MATH<t>:STATe).
Suffix:
<n>
.
irrelevant
<t> irrelevant
Parameters:
<Expression> (IMPLIED - MEMORY)
Subtracts the memory trace from trace 1.
(MEMORY - IMPLIED)
Subtracts trace 1 from the memory trace.
Example: //Define trace mathematics for trace 1
DISP:TRAC ON
DISP:TRAC:MODE AVER
CALC:MATH:COPY:MEM
CALC:MATH:STAT ON
CALC:MATH (IMPLIED - MEMORY)
Remote Commands of the Spectrum Application