R&S FPC Series - Page 376

Function Reference
R&S
®
FPC
373User Manual 1178.4130.02 ─ 07
Select Trace
See "Selecting a trace" on page 114 and "Selecting a second trace" on page 114.
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>[:STATe] on page 268
Trace Mode
See "Selecting the trace mode" on page 116.
Remote command:
Trace mode: DISPlay<n>[:WINDow]:TRACe<t>:MODE on page 267
# of averages: [SENSe:]SWEep:COUNt on page 270
Detector
See "Selecting the detector" on page 117.
Remote command:
Detector: [SENSe:]DETector<t>[:FUNCtion] on page 269
Auto detector: [SENSe:]DETector<t>[:FUNCtion]:AUTO on page 270
Memory Traces
See "Working with memory traces" on page 117.
Remote command:
Copy trace: CALCulate<n>:MATH<t>:COPY:MEMory on page 266
Memory trace state: DISPlay<n>[:WINDow]:TRACe<t>:MEMory[:STATe]
on page 267
Trace Math
See "Using trace mathematics" on page 118.
Remote command:
State: CALCulate<n>:MATH<t>:STATe on page 267
Operation: CALCulate<n>:MATH<t>[:EXPRession][:DEFine] on page 266
20.4.17 Lines Menu
Access: [Lines]
Display Line.................................................................................................................373
Show Limit Lines.........................................................................................................374
Upper Limit..................................................................................................................374
Lower Limit..................................................................................................................374
Audio Beep..................................................................................................................374
Display Line
See "Using a display line" on page 129.
Remote command:
State: CALCulate<n>:DLINe:STATe on page 288
Position: CALCulate<n>:DLINe on page 288
Function Reference: Spectrum Application