R&S FPC Series - Page 402

Function Reference
R&S
®
FPC
399User Manual 1178.4130.02 ─ 07
20.8.3 Span Menu
Access: [Span]
Manual Span
See "Defining the frequency span" on page 96.
Remote command:
State: [SENSe:]FREQuency:SPAN:AUTO on page 336
Span: [SENSe:]FREQuency:SPAN on page 250
Full Span
See "Defining the frequency span" on page 96.
(Not for distance to fault measurements.)
Remote command:
[SENSe:]FREQuency:SPAN:FULL on page 251
Coupled Span
See "Coupling frequency and span settings across measurements" on page 180.
(Distance to fault measurements only.)
Remote command:
[SENSe:]FREQuency:SETTings:COUPling:ENABle on page 335
20.8.4 Amplitude Menu
Access: [Ampt]
Reference Level..........................................................................................................399
Range / Ref Position................................................................................................... 399
Auto Range................................................................................................................. 400
Full Scale ................................................................................................................... 400
Reference Level
See "Defining the reference value" on page 181.
Remote command:
Cable loss format: DISPlay<n>:LOSS:REFerence on page 329
Return loss format: DISPlay<n>:MAGNitude:REFerence on page 330
Phase format: DISPlay<n>:PHASe:REFerence on page 332
Range / Ref Position
See "Defining the position of the reference line" on page 181 and "Defining the display
range" on page 182.
Remote command:
Ref position (cable loss): DISPlay<n>:LOSS:REFerence:POSition on page 329
Ref position (return loss): DISPlay<n>:MAGNitude:REFerence:POSition
on page 330
Ref position (phase): DISPlay<n>:PHASe:REFerence:POSition on page 332
Range (cable loss): DISPlay<n>:LOSS:Y:SCALe on page 329
Function Reference: Vector Network Analyzer