R&S NRP2 - Page 131

Instrument Functions
R&S
®
NRP2
113User Manual 1173.9157.02 ─ 03
6. Only for R&S NRP-Z8x wideband power sensors and if a time resolution beyond the
sample period is required:
Enable automatic activation of "Equivalent Time Sampling".
7. Close the "Mode" dialog (MENU key).
The trace window displays the waveform and the measurement results.
If the trace display is not visible check the trigger settings, see chapter 4.2.6, "Trigger
settings", on page 85.
4.5.2 Trace window
A trace measurement is displayed graphically, either in full height or in a half height win-
dow.
In half height window the meter shows the waveform(s) and an info panel indicating
selected measurement results or instrument settings. Control elements to directly change
the settings are not available.
Fig. 4-44: Trace window, half height display
Displaying traces