Chapter 4
34 OmniSeed™ Viper Pro™ Installation & Operation Manual
3. Select one of control channels currently assigned to the air cart node and touch within the Product Control
Settings area.
4. The first node settings screen for the selected control channel will be displayed.
Touch the Next button along the right side of the screen to display the second node settings screen.
5. Touch the displayed valve cal value. Using the on-screen keyboard, enter a valve cal value of ‘900#’ where
# is the desired number of control channels assigned to the air cart node.
For example, enter a value of ‘9005’ in the valve cal to enable all five control channels on the air cart node.
6. Touch the OK button until the Viper Pro main screen is displayed.
7. Select the Menu button in the lower, right corner of the display and select the Exit, Exit to Menu options.
To Next Page
Loading...
