Reer MOSAIC MI8O4C Installation And Use

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
176 8540780 • 10/07/2020 • Rev.38
English
Signal comparison
Signal comparison: Selecting this item will
allow the DIGITAL COMPARATOR operator
to compare the first four A inputs
(In1_A...In4_A) with the second four B
inputs (In1_B...In4_B).
Depending on the value of the inputs and
the operation selected, the following results
will be obtained:
 < (Lower): The OUT output will be
1 (TRUE) as long as the value of A
inputs is lower than the value of B inputs. The OUT output will be set to 0 (FALSE)
when the value of A inputs is higher than or equal to the value of B inputs.
 >= (Higher or equal): The OUT output will be 1 (TRUE) as long as the value of A
inputs is higher than or equal to the value of B inputs. The OUT output will be set to
0 (FALSE) when the value of A inputs is lower than the value of B inputs.
 > (Higher): The OUT output will be 1 (TRUE) as long as the value of A inputs is
higher than the value of B inputs. The OUT output will be set to 0 (FALSE) when the
value of A inputs is lower than or equal to the value of B inputs.
 <= (Lower or equal): The OUT output will be 1 (TRUE) as long as the value of A
inputs is lower than or equal to the value of B inputs. The OUT output will be set to
0 (FALSE) when the value of A inputs is higher than the value of B inputs.
 = (Equal): The OUT output will be 1 (TRUE) as long as the value of A inputs is equal
to the value of B inputs. The OUT output will be set to 0 (FALSE) when the value of A
inputs is different from the value of B inputs.
 != (Different): The OUT output will be 1 (TRUE) as long as the value of A inputs is
different from the value of B inputs. The OUT output will be set to 0 (FALSE) when
the value of A inputs is equal to the value of B inputs.

Reer MOSAIC MI8O4C Specifications

General

Brand	Reer
Model	MOSAIC MI8O4C
Category	Controller
Language	English