Reer MOSAIC MI8O4C Installation And Use

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
8540780 • 10/07/2020 • Rev.38 91
English
Standard tool bar
The standard tool bar is shown in Figure 51. The meanings of the icons are listed below:
Figure 51
1 -> CREATE A NEW PROJECT
2 -> CHANGE CONFIGURATION (composition of different modules)
3 -> CHANGE USER PARAMETERS (name, company, etc)
4 -> SAVE THE ACTUAL PROJECT
5 -> LOAD AN EXISTING PROJECT (FROM THE PC)
6 -> PRINT THE PROJECT SCHEMATIC
7 -> PRINT PREVIEW
8 -> PRINTING AREA
9 -> SNAP TO GRID
10 -> RESOURCES ALLOCATION
11 -> PRINT THE PROJECT REPORT
12 -> UNDO (CANCEL THE LAST COMMAND)
13 -> REDO (RESTORE THE LAST CANCELLATION)
14 -> VALIDATE THE PROJECT
15 -> CONNECT TO MOSAIC
16 -> SEND PROJECT TO MOSAIC
17 -> DISCONNECT FROM MOSAIC
18 -> DOWNLOAD AN EXISTING PROJECT (FROM MOSAIC)
19 -> MONITOR (Real time I/O status - graphic)
20 -> MONITOR (Real time I/O status - textual)
21 -> DOWNLOAD LOG FILE
22 -> SHOW SYSTEM CONFIGURATION
23 -> DOWNLOAD ERRORS LOG
24 -> DELETE ERRORS LOG
25 -> SCHEMATIC SIMULATION
26 -> GRAPHIC SIMULATION
27 -> CHANGE PASSWORD
28 -> HELP ON-LINE
29 -> PASSWORD RECOVERY

Reer MOSAIC MI8O4C Specifications

General

Brand	Reer
Model	MOSAIC MI8O4C
Category	Controller
Language	English