MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
8540780 • 10/07/2020 • Rev.38 55
Master M1S (Figure 16)
Table 29 - Opening Screen
ON = M1
connected to PC
OFF=otherwise
RED with output OFF
GREEN with output ON
YELLOW waiting for restart
BLINKING YELLOW with
inconsistent feedback (if
required)
ON
incorrect
external
connection
detected
ON = M1
connected to PC
OFF=otherwise
only the number of the
INPUT with the incorrect
connection flashes
Table 30 - Dynamic Screen
Writing/loading/ diagram
to/from MCM card
MSD requesting connection:
internal configuration not present
MSD requesting connection:
(slave module or node number
not correct) (ref. System composition)
MSD requesting connection:
(slave module missing or not ready)
(ref. System composition)
To Next Page
Loading...
Need help?
General
