Ricoh Aficio 2022 - Page 780

Preparations for Use as a Network Scanner
14
2
Scan Settings
This section explains how to set the
defaults for scan settings.
The scan settings consist of the fol-
lowing. For the list about settings and
defaults, see p.11 “Scanner Features”.
❖
❖❖
❖ Default Scan Settings
Various basic settings (scan type,
resolution, image density, scan
size) can be set.
• Scan Type
Select the scan type from the fol-
lowing:
• Text (Print)
For standard originals contain-
ing mainly text (for print)
• Text (OCR)
For standard originals contain-
ing mainly text (for OCR)
• Text/ Photo
For originals containing a mix-
ture of text and photographs
• Photo
For originals containing photo-
graphs and other pictures (two-
value)
• Gray Scale
For originals containing photo-
graphs and other pictures (mul-
ti-value)
Note
❒ Printer printing is best scanned
with Text (Print). Text (OCR) is
suitable for higher OCR accura-
cy.
❒ An image is scanned in black &
white with Photo, and in gray-
scale with Gray Scale. As a gen-
eral rule, scanning for the
purpose of printing is best done
with Photo and scanning for
viewing on the computer screen
with Gray Scale.
• Resolution
Select the resolution from 100 dpi,
200 dpi, 300 dpi, 400 dpi, or 600
dpi.
• Image Density
Select the image density in seven
steps from Lighter (1) to Darker (7)
or use Auto Image Density.
• Scan Size
Select the size of the original to be
scanned.
When [Auto Detect] is selected, the
auto detect function of the ma-
chine is used to set the original
size.
When the size is specified, scan-
ning is performed for that size, re-
gardless of the actual size of the
original. The following sizes can be
selected:
A3S, A4R, A4S, A5R, A5S, 11
x 17S, 8
1
/
2
x 14S, 8
1
/
2
x 13S,
8
1
/
2
x 11R, 8
1
/
2
x 11S, 5
1
/
2
x
8
1
/
2
R, 5
1
/
2
x 8
1
/
2
S, B4 JISS (Jap-
anese Industrial Standard), B5
JISR, B5 JISS, Custom size
Note
❒ When [Custom size] is selected,
the dimensions of the scan area
(width and height) can be speci-
fied.
❒ When selecting [Custom size] for
[Scan Size], see p.17 “Selecting a
custom size”.