Ricoh Aficio 2022 - Page 812

Sending Scan File by E-mail
46
4
B Press [Switch Destination List].
C Press [E-mail].
D Press [Exit].
The E-mail screen appears.
F
FF
F
Specify the destination.
To specify a destination, you can
select it from the list, select it by
specifying a registration number,
enter the e-mail address directly,
search for the destination from the
Destination List and selecting it, or
search for the destination from the
LDAP server and selecting it.
Note
❒ Before selecting the destination,
be sure to select [To]. If neces-
sary, select [Cc] or [Bcc] and the
respective destinations. More
than 500 destinations cannot be
specified for [To], [Cc], and
[Bcc].
Reference
See p.101 “Max. Number of Ad-
dresses Which Can Be Specified
and Files Which Can Be
Stored”
.
When selecting a destination
from the list
A Press the title for the destina-
tion. The destinations for that
title are displayed.
If the destination is not dis-
played, press [U
UU
U] or [T
TT
T] to dis-
play the destination.
B Select the destination to which
the scan file is to be sent.
The selected destination is high-
lighted and also displayed in
the destination field at the top of
the screen.
C To select more destinations, re-
peat step B
BB
B.
Note
❒ To deselect a destination,
press the destination once
more, or press [U
UU
U Prev.] or [T
TT
T
Next] to display the destina-
tion in the destination field,
and then press the {
{{
{Clear/
Stop}
}}
} key.