M126/M127/M128 5-6 SM
5.2.3 RESET MAINTENANCE COUNTER
After scheduled maintenance, reset the Maintenance Counter.
To reset the maintenance page counter to zero:
1. Touch "Reset Maintenance Counter" from the Configuration Menu.
2. "Reset Maintenance Counter" appears in the header.
3. To cancel the reset operation, touch "Back" or "No". All other button presses are ignored.
4. To initiate the reset operation, touch "Yes".
5.2.4 RESET PHOTOCONDUCTOR MAINTENANCE COUNTER
(RESET PC CNT)
This setting resets the photoconductor kit page counter and clears any warnings or
photoconductor exhausted messages. This operation should be performed only after a new
photoconductor unit has been installed.
To Next Page
Loading...
