Ricoh M126 - Manual Feed Solenoid Removal

Removal Procedures
SM 4-37 M126/M127/M128
Replacement
and
Adjustment
4.2.24 MANUAL FEED SOLENOID REMOVAL
1. Left side cover ( p.4-26 "Left Side Cover Removal")
2. Duplex (
p.4-16 "Duplex Removal")
3. Open the front access door, and place the printer on its right side.
 Be careful to not mar the finish of the printer.
4. Remove the two screws (A).
5. Remove the three screws (B) from the left door mount.
6. Lift and remove the left door mount (C) away from the side frame, and unroute the cable (D)