Maintenance
5.2.8 PPDS EMULATION
The value of the PPDS Emulation menu item determines if a device can recognize and use the
PPDS datastream. The current value of this setting appears in parentheses to the right of the
setting on the Configuration Menu screen.
The following table indicates how the value of this setting affects the user default value for the
SmartSwitch and Printer Language settings:
Value of PPDS
Emulation setting
Resulting value of
SmartSwitch setting
(all ports)
Resulting value for Printer Language
settings
Activate Off
PPDS Emulation
You can still switch languages on
the operator panel or through the
PJL ENTER LANGUAGE
command.
Deactivate On Machine’s factory default value
To change the value of this setting:
1. Touch "PPDS Emulation" from the Configuration Menu.
[setting's current value]
appears on the touch-screen.
2. Touch
or to scroll through the setting's possible values.
3. Touch "Back" to cancel and return to the Configuration Menu.
4. Touch "Submit" to save the change.
To Next Page
Loading...
