Ricoh M126 - Engine Settings 1 through; Model Name; Permanent Page Count; Printed Page Count

Diagnostics Menu
SM 5-39 M126/M127/M128
System
Maintenance
 If you make changes, touch "Submit" to make the change effective.
Defaults
US/Non-US defaults changes whether the machine uses the US factory defaults or the non-US
factory defaults. The settings affected include paper size, envelope size, PCL symbol set, code
pages, and units of measure.
 Changing this setting resets the machine to factory defaults, and data may be lost. It
cannot be undone.
Printed page count
The page count can only be viewed and cannot be changed.
Touch "Back" to return to the Diagnostics Menu.
Permanent page count
The permanent page count can only be viewed and cannot be changed.
Touch "Back" to return to the Diagnostics Menu.
Serial number
The serial number can only be viewed and cannot be changed.
Touch "Back" to return to the Diagnostics Menu.
Engine settings 1 through 4
Do not change these settings unless requested to do so by your next level of support.
Model name
The model name can only be viewed and cannot be changed.