Ricoh M126 - Multipurpose Feeder (Mpf) Feed Clutch Removal

Removal Procedures
SM 4-49 M126/M127/M128
Replacement
and
Adjustment
4.2.29 MULTIPURPOSE FEEDER (MPF) FEED CLUTCH REMOVAL
1. Left side cover ( p.4-26 "Left Side Cover Removal")
2. Duplex (
p.4-16 "Duplex Removal")
3. Disconnect the cable (A) from J24 on the engine board.
4. Place the printer on its right side.
 Be careful to not damage any cables or mar the finish of the printer.
5. Remove the three screws (B) from the left side of the printer.