Maintenance
sensor is working properly.
6. To test scanner sensor 2 press on the tab (D). The 0 next to the 2 will change to 1 if the
sensor is working properly.
7. To test the ADF cover open sensor, open the ADF top cover. Id the sensor is functioning
properly the 0 next to the A will change to 1.
8. Press "Stop"
to return to the SCANNER TESTS menu.
5.3.15 EXIT DIAGNOSTICS
Selecting "EXIT DIAGNOSTICS" exits the Diagnostics menu, and "Resetting the Printer" displays.
The machine performs a POR, and the machine returns to normal mode.
To Next Page
Loading...
