Ricoh M126 - Left Side Cover Removal

M126/M127/M128 4-26 SM
4.2.18 LEFT SIDE COVER REMOVAL
 Leave the front door closed when removing the left side cover.
 Make sure that the fuser cables are out of the way when removing the left side cover.
1. Scanner front cover (
p.4-25 "Scanner Front Cover Removal")
2. Move the scanner assembly to the up position (
p.4-87 "Lifting the Scanner to the Up
Position")
3. Remove the plastic screw (A) that secures the left cover to the tub assembly.
4. Remove the metal screw (B) that secures the left cover to the front of the print engine frame.
5. Move the machine to the edge of the table.
6. Open the front cover slightly.