Ricoh M126 - Print Quality Pages; Usb Scan to Local

Configuration Menu (CONFIG MENU)
SM 5-7 M126/M127/M128
System
Maintenance
5.2.5 USB SCAN TO LOCAL
USB Scan to Local enumerates a USB simple device or USB composite device. In the off position
the simple USB device is enumerated: in the on position, the composite USB device is
enumerated.
To change this setting:
1. Touch "USB Scan to Local" from the Configuration Menu.
[setting's current value]
appears on the touch-screen.
2. Touch
or to scroll through the setting's possible values.
3. Touch "Back" to cancel and return to the Configuration Menu.
4. Touch "Submit" to save the change.
5.2.6 PRINT QUALITY PAGES
This setting is a limited version of the "Print Quality Pages" setting that appears in the
"Diagnostics" menu. This setting reports the values of a broad range of machine settings and tests
the machine’s ability to generate acceptable printed output.
To print the Print Quality Pages:
1. Touch "Print Quality Pages" from the Configuration Menu. "Printing Quality Test Pages..."
appears on the LCD.
Touch "Back" to return to the Configuration Menu.
The Reports menu contains two selections: Menu Settings Page and Event Log.
Menu settings page
To print the Menu Settings page, press . Press to return to the Configuration menu.
Event log
The event log provides a history of errors. The event log can only be printed in the Configuration
menu. Additional options are available in the Diagnostics menu. See “Reports” in “System
Maintenance”.
To print the event log:
1. Select "Print Event Log" from the Event Log menu.
2. Press
to return to the Configuration menu.
 An event log printed from the CONFIG MENU will not contain debug information or
secondary codes for 900 service errors. However, the event log printed from
DIAGNOSTICS mode does include this information.