Connecting to a computer with a modem
Connect the printer to a computer with a modem to send faxes from the software program.
Note: Setup steps may vary depending on your country or region.
1 Make sure you have the following:
• A telephone
• A computer with a modem
• Three telephone cords
• A telephone wall jack
2 Connect one end of the telephone cable that came with the printer to the printer LINE port .
3 Connect the other end of the telephone cable to an active analog telephone wall jack.
4 Remove the protective plug from the printer EXT port .
5 Connect your telephone to the computer telephone jack.
Note: See the manual that came with your computer for the telephone connections.
Faxing
128
To Next Page
Loading...
