Ricoh M126 - Fax Error Codes; Fax Error Log Codes

M126/M127/M128 6-44 SM
6.4.5 FAX ERROR CODES
Fax error log codes
Error code Description Action
000
No error occurred during fax
transmission
No action needed
200
Error occurred when transmitting
training.
 Check line quality.
 Select a lower ‘Max Speed’.
 value under Fax Send
settings
 Adjust the transmit level.
3XX
Error occurred when receiving
image data.
 Check line quality.
 Adjust ‘Receive Threshold’.
 Select a lower ‘Max Speed’
value under Fax Receive
settings.
4XX
Error occurred when sending image
data.
 Check line quality.
 Adjust ‘Transmit Level’.
 Select a lower ‘Max Speed’
value under Fax Receive
settings.
5XX
Received unknown response from
remote fax device.
No action needed. Issue is with
the other device.
6XX
Error occurred when receiving a
frame.
 Check line quality.
 Adjust ‘Receive Threshold’.
7XX
Error occurred when sending a
frame.
 Check line quality.
 Adjust ‘Transmit Level’.
 Select a lower ‘Max Speed’
value under Fax Send
settings.
800
Received EOT unexpectedly from
the modem in V34 mode.
 If error persists disable V34
modulation scheme.