Ricoh M126 - Exit Configuration Menu (Exit Config Menu); Usb Pnp

Configuration Menu (CONFIG MENU)
SM 5-23 M126/M127/M128
System
Maintenance
5.2.34 USB PNP
This setting is used to improve the machine’s compatibility with the host PC.
 Some PCs contain chipsets that may be incompatible with this machine.
To change this setting:
1. Touch
to select "USB PnP" from the Configuration Menu.
2. Touch
or to change the value. The values are 1 (default) and 2.
3. Touch "Submit" to save the change.
Touch "Back" to cancel and return to the Configuration Menu.
5.2.35 EXIT CONFIGURATION MENU (EXIT CONFIG MENU)
Press to exit the Configuration menu. The machine performs a POR and restarts in normal
mode.