M126/M127/M128 5-10 SM
5.2.9 DOWNLOAD EMULS
This setting enables you to disable a Downloadable emulator (DLE) that is installed on the
machine. The setting for this menu setting is disabled.
The DLE is re-enabled automatically after two PORs.
To change the value of this setting:
1. Touch Download Emuls from the Configuration Menu. [setting's current value]
appears on the touch-screen.
2. Touch
or to scroll through the setting's possible values.
3. Touch "Back" to cancel and return to the Configuration Menu.
4. Touch "Submit" to save the change.
5.2.10 FACTORY DEFAULTS
This operation cannot be undone.
This setting enables you to restore all of the machine’s settings to the base machine settings, the
network settings, or to remove all LES applications.
To restore the Factory Default settings:
1. Touch "Factory Defaults" from the Configuration Menu.
2. Touch "Restore Base" to restore all non-critical base machine NVRAM settings.
3. Touch "Restore Network" to restore all network NVRAM settings.
4. Touch "Restore LES" to remove all LES applications.
When you select either value, the LCD displays "Restoring Factory Defaults" and then "Resetting
the Device". The device immediately performs a POR and restores the appropriate settings to
their factory default values.
The following settings are not changed:
Display Language (general settings)
Network/Ports Menu
Standard USB, USB (x) Menus (if an ENA is installed)
To Next Page
Loading...
