How to load envelopes
Types of envelopes Trays 2–3 Bypass tray or wide LCT
Side-opening
envelopes
• Flaps: open
• Bottom side of envelopes:
toward the right of the
machine
• Side to be printed: face down
• Flaps: open
• Bottom side of envelopes:
toward the left of the machine
• Side to be printed: face up
Side-opening
envelopes
• Flaps: closed
• Bottom side of envelopes:
toward the back of the
machine
• Side to be printed: face down
• Flaps: closed
• Bottom side of envelopes:
toward the back of the
machine
• Side to be printed: face up
When loading envelopes, select "Envelope" as the paper types using both [Tray Paper Settings]
and printer driver and specify the thickness of envelopes. For details, see page 125 "Printing on
Envelopes".
Rotate the print image by 180 degrees using the printer driver when printing on the following
paper:
• Envelopes that are loaded with their short edges against the machine body
• Envelopes that are loaded with their long edges against the machine body in the bypass tray
and wide LCT
Recommended envelopes
For information about recommended envelopes, contact your local dealer.
For details about the sizes of envelopes you can load, see page 189 "Recommended Paper Sizes
and Types".
• It is recommended to place one sheet at a time.
Recommended Paper
207
To Next Page
Loading...
