• When using the Smart Operation Panel
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Press the [User Tools] icon ( ) on the [Home] screen.
3. Press [Tray Paper Settings].
2. Select the number of the tray whose paper settings you want to specify.
3. Press [Paper Type Auto Identification].
4. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
The list of custom paper whose configurations are similar to those of the scanned paper appears.
8. Adding Paper and Toner
216
To Next Page
Loading...
