Message Cause Solution
"All remaining print vol.
allocated to other cent.
managed client. Job was
cancelled."
The job was canceled
because the usage count
information could not be
obtained from the Central
Management machines.
All job slots are occupied by other
devices. Check the status of the client
machine.
"Error occurred while
processing a Compulsory
Security Stamp job. Job was
cancelled."
The job was canceled
because an error occurred
while applying Compulsory
Security Stamp.
When feeding paper from bypass tray,
specify the correct paper size (other
than [Auto Detect]).
When there is a problem with the print settings
Message Cause Solution
"Booklet/Half Fold Error" The job was canceled because
you specified invalid settings for
saddle stitching or half fold.
Check the settings for saddle
stitching or half fold.
"Classification Code is
incorrect."
The classification code has not
been entered, or the
classification code has been
entered incorrectly.
Enter the correct classification
code.
"Classification Code is
incorrect."
The classification code is not
supported with the printer
driver.
Select [Optional] for
classification code. For details
about how to specify
classification code settings, see
"Configuring Classification
Codes", Print.
9. Troubleshooting
250
To Next Page
Loading...
