4. Press the program number you want to register.
5. Enter the program name.
6. Press [OK].
7. Press [Exit].
• The number of characters you can enter for a program name varies depending on the functions as
follows:
• Standard Applications
• Copy: 40 characters
• Scanner: 40 characters
• Quick Applications
• Quick Copy: 40 characters
• Quick Scanner: 40 characters
• Classic Applications
• Copier (Classic): 34 characters
• Document Server: 34 characters
• Scanner (Classic): 34 characters
• When a specified program is registered as the default, its values become the default settings, which
are displayed without recalling the program, when modes are cleared or reset, and after the
machine is turned on. See "Changing the Default Functions of the Initial Screen", Convenient
Functions.
• When the paper tray you specified in a program is empty and if there is more than one paper tray
with the same size paper in it, the paper tray prioritized under [Paper Tray Priority: Copier] in the
[Tray Paper Settings] tab will be selected first. For details, see "General Features", Connecting the
Machine/ System Settings.
2. Getting Started
80
To Next Page
Loading...
