6. Press [OK].
7. Place the originals.
8. Press [Start].
• You cannot use the following copy paper with this function:
• Transparency
• Tab Stock
• Translucent Paper
• Label Paper
• Envelope
• Clear File Folder
• Carbonless Paper
• When an odd number of originals are placed in the ADF, the back of the last page of copied
paper is blank.
• You can also select [1 Sided 2 Sided] or [2 Sided 2 Sided] directly by pressing the function
key. In that case, specify the original orientation under [Original Settng], and then proceed to Step
7.
• For details about the sizes, orientations, and weights of paper that can be used in the Duplex
function, see the following section:
• page 474 "Specifications for the Main Unit"
• You can specify the margins under [Edit / Stamp] in Settings. For details, see the following section:
• See "Edit / Stamp", User Guide.
Specifying the Original and Copy Orientation
Select the orientation of the originals and copies if the original is two-sided or if you want to copy onto
both sides of the paper.
• Top to Top
• Top to Bottom
Duplex Copying
99
To Next Page
Loading...
