Ricoh Pro C5300S - When Using the High Capacity Stacker

D0CPIC1787
6. Attach the second paper strengthening rib. Repeat Steps 3 to 5.
7. Set [0840 Staple Tray: Rib Installed Mode to Strengthen Paper] in [Adjustment Settings for
Operators] to [On].
When Using the High Capacity Stacker
Stacker control panel
The high capacity stacker has a control panel that you can use to lower the stacker tray and
confirm the status of the high capacity stacker.
D0CPIC1788
1
1
2
2
3
3
4
4
7
7
5
5
6
6
1. Tray Moving Indicator
This flashes blue when the stacker tray is moving up or down. When the stacker tray has moved all the
way up and is in the standby state, the indicator turns off. When the stacker tray has moved all the way
down, the indicator lights up blue.
2. Lower Tray Button
Press this button to lower the tray. The tray cannot move if the stacker front cover is open.
3. Paper Jam Button
This is lit red when a paper jam occurs. Pressing this button lowers the stacker tray into the paper
removal position.
4. Cover of the Stacker Control Panel
Special Notes When Using External Options
49