Using the Printer Function
Types of envelopes Trays 2–3
Bypass tray or Wide LCT
or Two-tray wide LCT
or Multi bypass tray (Tray A)
Side-opening
envelopes
• Flaps: open
• Side to be printed: face down
• Flaps: open
• Side to be printed: face up
Side-opening
envelopes
• Flaps: closed
• Side to be printed: face down
*1
• Flaps: closed
• Side to be printed: face up
*1
You cannot print from the two-tray wide LCT or the multi bypass tray.
When loading envelopes, select "Envelope" as the paper types using both [Tray Paper Settings] and
printer driver and specify the thickness of envelopes.
page 157 "Printing on Envelopes"
When loading envelopes, select the check box of [Rotate by 180 Degrees] on [Detailed Settings] tab
[Basic] menu, and then print.
Rotate the print image by 180 degrees using the printer driver when printing on the following paper:
• Envelopes that are loaded with their short edges against the machine body
• Envelopes that are loaded with their long edges against the machine body in the bypass tray and
wide LCT
Loading envelopes on the two-tray wide LCT:
• If a paper jam occurs, load 5 more envelopes.
• Keep the height difference between the bottom of the envelopes and flaps within 10 mm.
Envelope Orientation and Recommended Status
279
To Next Page
Loading...
