• Open the finisher front
cover.
• Pull handle Rb18, and
then pull out staple
unit.
• Turn knob Rb19
counterclockwise to
rotate the staple unit.
• Pull out the Waste
Staple Receptacle,
then empty it.
• Put the receptacle
back.
• Pull out the cartridge.
• Remove the empty refill
in the direction of the
arrow.
• Push in the new
cartridge until it clicks.
• Hold the green lever
and push in the
cartridge until it clicks,
then raise the lever.
• Push the cartridge until it clicks.
• Return the staple unit to its original position.
• Close the finisher front cover.
D0CPIC1605
11. Troubleshooting
To Next Page
Loading...
