Ricoh Pro C5300S - Placing an Original in the Auto Document Feeder (ADF)

8. Paper Specifications and Adding
Paper
Placing an Original on the Exposure Glass
Use the exposure glass to scan originals that cannot be placed in the auto document feeder (ADF), such
as books and license cards.
• When lowering the ADF, do not place your hands on the hinges and exposure glass. Your
hands or fingers are caught, which can result in injury.
• Do not lift the ADF forcefully. The cover of the ADF might open and cause injury. The ADF, or its
hinges may also become damaged.
1. Lift the ADF.
Lift the ADF by more than 30 degrees to detect the document size automatically when placing an
original on the exposure glass.
2. Place the original face down and aligned to the mark on the upper left corner of the scan
area.
D0CMIC1356
page 284 "Recommended Original Size and Weight"
page 286 "Sizes Detectable with Auto Paper Select"
3. Lower the ADF.
• You can set a book or object that is less than 40 mm (1.57 inches) thick. A book or object that is
thicker than 40 mm (1.57 inches) cannot be set.
191