Ricoh Pro C5300S - 0828: Set Number of Folds for Booklet; 0838: Accuracy Priority for Stapling; 0839: Accuracy Priority for Booklet

0828: Set Number of Folds for Booklet
Specify the number of booklet folds to be performed when using Booklet Finisher SR5120.
You can adjust the paper folding strength by changing the number of folds per the booklet.
When you select "0", the default value, the finisher folds the booklet according to the number of sheets
in the booklet, as shown below.
• 1–6 sheets: 1 time
• 7–10 sheets: 2 times
• 11–30 sheets: 6 times
The value set here is added to the default values. Set a negative value to reduce the number of times the
finisher folds booklets.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Number of Folds for Booklet 0 6 -6 1 time(s)
0838: Accuracy Priority for Stapling
Set the accuracy priority for stapling.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Setting Item Values Default Value
Accuracy Priority for Stapling Speed Priority
Accuracy Priority
Speed Priority
0839: Accuracy Priority for Booklet
Set the accuracy priority for a booklet.
This function can be used with Booklet Finisher SR5120.
Setting Item Values Default Value
Accuracy Priority for Booklet Speed Priority
Accuracy Priority
Speed Priority
07: Finishing: Finisher
345