8. When sending the same original to several destinations (broadcasting), specify the next
destination.
9. If you send documents to Internet Fax or e-mail destinations or enable the Email TX
Results function, specify a sender.
See "Specifying Sender Settings for Fax Transmission", User Guide.
If the Auto Specify Sender Name function is enabled, the sender is automatically specified and you
can omit the procedure for specifying a sender.
10. Press [Start].
Sending Originals Using the Exposure Glass
1. Make sure [Immed. TX] is not highlighted.
2. Place the first page of the original face down on the exposure glass.
3. Specify a destination.
4. Make the scan settings you require.
5. Press [Start].
6. Place the next original on the exposure glass within 60 seconds when you send multiple
originals, and then repeat Steps 4 and 5.
Repeat this step for each page.
You can specify the waiting time for adding an original using [Wait Time for Next Original:
Exposure Glass] on the Fax Settings menu.
See "Scan Settings", User Guide.
Basic Procedure for Fax Transmissions (Memory Transmission)
115
To Next Page
Loading...
