3. Press the [Down] key.
The key blinks while the bottom plate is moving down.
4. Load paper by repeating Steps 2 and 3.
5. Close the top cover of the LCT.
6. Specify the paper settings.
page 289 "Overview of Paper Settings"
Loading Paper into the Wide LCT
Various sizes of paper can be loaded in the wide LCT by adjusting the positions of side fences and end
fence.
• Check that the paper edges are aligned with the left side.
• When loading translucent paper, always use long grain paper, and set the paper direction
according to the grain.
8. Paper Specifications and Adding Paper
218
To Next Page
Loading...
