Ricoh Pro C5300S - When Using the Z-Fold Function

If delivered to finisher shift tray 2
1. Press the [Suspend / Resume] key of finisher shift tray 2.
D0CPIC1764
1
1
1. [Suspend / Resume] key
2. Remove the stack of paper from the finisher shift tray 2.
D0CPIC1765
3. Press the [Suspend / Resume] key to restart the print.
When Using the Z-fold Function
To use the Z-fold function, you must attach the Z-fold support tray.
Finisher SR5090/Booklet Finisher SR5100
• Finisher upper tray
1. Remove the output paper.
2. Attach the Z-fold support tray 2 to the finisher upper tray.
The back of the Z-fold support tray 2 is embossed with "2".
1. Getting Started
40